A chemiresistive sensor array based on polyaniline nanocomposites and machine learning classification

• Jiri Kroutil,
• Alexandr Laposa,
• Ali Ahmad,
• Jan Voves,
• Vojtech Povolny,
• Ladislav Klimsa,
• Marina Davydova and
• Miroslav Husak

Beilstein J. Nanotechnol. 2022, 13, 411–423, doi:10.3762/bjnano.13.34

• 1999/2, 182 21 Prague, Czech Republic 10.3762/bjnano.13.34 Abstract The selective detection of ammonia (NH3), nitrogen dioxide (NO2), carbon oxides (CO2 and CO), acetone ((CH3)2CO), and toluene (C6H5CH3) is investigated by means of a gas sensor array based on polyaniline nanocomposites. The array

Piezotronic effect in AlGaN/AlN/GaN heterojunction nanowires used as a flexible strain sensor

• Jianqi Dong,
• Liang Chen,
• Yuqing Yang and
• Xingfu Wang

Beilstein J. Nanotechnol. 2020, 11, 1847–1853, doi:10.3762/bjnano.11.166

• by MOCVD (Thomas Swan). Trimethylgallium (TMGa), trimethylaluminum (TMAl), and ammonia (NH3) were used as Ga, Al, and N sources, respectively. N2 and H2 were used as carrier gases in the growth process. A 1 μm layer of unintentionally doped GaN was deposited as the buffer layer on a sapphire

Preparation, characterization and photocatalytic performance of heterostructured CuO–ZnO-loaded composite nanofiber membranes

• Wei Fang,
• Liang Yu and
• Lan Xu

Beilstein J. Nanotechnol. 2020, 11, 631–650, doi:10.3762/bjnano.11.50

• chloride (ZnCl2, Mw = 73.09 g/mol), hexamethylenetetramine (C6H12N4, Mw = 140.19 g/mol) and ammonia (NH3·H2O, Mw = 17.03 g/mol) were supplied from China Pharmaceutical Group Chemical Reagents Co., Ltd. (Shanghai, China). Methyl orange (Mw = 327.34 g/mol) was purchased from Shanghai Debai Biotechnology Co

Synthesis of highly active ETS-10-based titanosilicate for heterogeneously catalyzed transesterification of triglycerides

• Muhammad A. Zaheer,
• David Poppitz,
• Khavar Feyzullayeva,
• Marianne Wenzel,
• Jörg Matysik,
• Radomir Ljupkovic,
• Aleksandra Zarubica,
• Alexander A. Karavaev,
• Andreas Pöppl,
• Roger Gläser and
• Muslim Dvoyashkin

Beilstein J. Nanotechnol. 2019, 10, 2039–2061, doi:10.3762/bjnano.10.200

Selective gas detection using Mn₃O₄/WO₃ composites as a sensing layer

• Yongjiao Sun,
• Zhichao Yu,
• Wenda Wang,
• Pengwei Li,
• Gang Li,
• Wendong Zhang,
• Lin Chen,
• Serge Zhuivkov and
• Jie Hu

Beilstein J. Nanotechnol. 2019, 10, 1423–1433, doi:10.3762/bjnano.10.140

• between the two metal oxides. The sensor based on the Mn3O4/WO3 composite with 3 atom % Mn showed a high selective response to hydrogen sulfide (H2S), ammonia (NH3) and carbon monoxide (CO) at working temperatures of 90 °C, 150 °C and 210 °C, respectively. The demonstrated superior selectivity opens the

A review of carbon-based and non-carbon-based catalyst supports for the selective catalytic reduction of nitric oxide

• Shahreen Binti Izwan Anthonysamy,
• Syahidah Binti Afandi,
• Mehrnoush Khavarian and
• Abdul Rahman Bin Mohamed

Beilstein J. Nanotechnol. 2018, 9, 740–761, doi:10.3762/bjnano.9.68

• gasoline engines. In the SCR of NO, a reducing agent must be introduced into the system in order to successfully convert NO into nitrogen (N2), inert gases such as ammonia (NH3), and urea [5]. The reaction system reduces the Gibbs free energy values initiated by the reducing agent; the introduction of

Colloidal solution of silver nanoparticles for label-free colorimetric sensing of ammonia in aqueous solutions

• Alessandro Buccolieri,
• Antonio Serra,
• Gabriele Giancane and
• Daniela Manno

Beilstein J. Nanotechnol. 2018, 9, 499–507, doi:10.3762/bjnano.9.48

• Alessandro Buccolieri Antonio Serra Gabriele Giancane Daniela Manno GFA-Gruppo di Fisica Applicata, Dipartimento di Matematica e Fisica “E. De Giorgi”, Università del Salento Lecce, Italy 10.3762/bjnano.9.48 Abstract Silver nanoparticles were synthesized in the presence of saccharides and ammonia

• (NH3) in the concentration range from 10−2 to 103 ppm to develop an optical sensor for NH3 in aqueous solutions. Ammonia affects the features of the nanoparticles obtained in a concentration-dependent manner as determined by UV–vis absorption analysis and TEM observations. Structural and morphological

Gas-sensing behaviour of ZnO/diamond nanostructures

• Marina Davydova,
• Alexandr Laposa,
• Jiri Smarhak,
• Alexander Kromka,
• Neda Neykova,
• Josef Nahlik,
• Jiri Kroutil,
• Jan Drahokoupil and
• Jan Voves

Beilstein J. Nanotechnol. 2018, 9, 22–29, doi:10.3762/bjnano.9.4

• ) in order to investigate their gas sensing properties for nitrogen dioxide (NO2), ammonia (NH3) and carbon dioxide (CO2) at different concentration ranges of 25–100 ppm or 1250–5000 ppm. For this purpose we developed three different gas sensor devices based on i) NCD thin films, ii) ZnO nanorods, and

• ), nitrogen dioxide (NO2) and ammonia (NH3) at different concentrations at a temperature of 150 °C. The constant gas flow of 100 mL/min was maintained during all the measurements. Results and Discussion Materials characterization and gas sensing Figure 2a shows a top-view SEM surface morphology image of the

Bi-layer sandwich film for antibacterial catheters

• Gerhard Franz,
• Florian Schamberger,
• Hamideh Heidari Zare,
• Sara Felicitas Bröskamp and
• Dieter Jocham

Beilstein J. Nanotechnol. 2017, 8, 1982–2001, doi:10.3762/bjnano.8.199

• easily precipitated by Cl− ions. The solubility product is 10−10 mol2/L2. Urine contains approximately 0.1 M of Cl−. Silver and silver ions can only be used because urine also contains urease and urea, which generate ammonia, NH3. Ammonia is responsible for a successful application of the antibacterial

Hierarchically structured nanoporous carbon tubes for high pressure carbon dioxide adsorption

• Julia Patzsch,
• Deepu J. Babu and
• Jörg J. Schneider

Beilstein J. Nanotechnol. 2017, 8, 1135–1144, doi:10.3762/bjnano.8.115

• material. Experimental Materials Polystyrene (PS, pro-plast from BASF), tetraethylorthosilicate (TEOS, ABCR), ammonia (NH3, Grüssing), dimethylformamide (DMF, Merck), tetrahydrofuran (THF, Merck), and ethanol (EtOH, Brenntag) were used as received without further purification. Synthesis of polystyrene

Graphene functionalised by laser-ablated V₂O₅ for a highly sensitive NH₃ sensor

• Margus Kodu,
• Artjom Berholts,
• Tauno Kahro,
• Mati Kook,
• Peeter Ritslaid,
• Helina Seemen,
• Tea Avarmaa,
• Harry Alles and
• Raivo Jaaniso

Beilstein J. Nanotechnol. 2017, 8, 571–578, doi:10.3762/bjnano.8.61

• structures was investigated using Raman spectroscopy. Based on the electrical conductivity modulation, the room temperature gas sensing properties of the manufactured sensor structure towards ammonia (NH3) and (for comparison) nitrogen dioxide (NO2) gases were investigated. Results Figure 1a shows a typical

Viability and proliferation of endothelial cells upon exposure to GaN nanoparticles

• Tudor Braniste,
• Ion Tiginyanu,
• Tibor Horvath,
• Simion Raevschi,
• Serghei Cebotari,
• Marco Lux,
• Axel Haverich and
• Andres Hilfiker

Beilstein J. Nanotechnol. 2016, 7, 1330–1337, doi:10.3762/bjnano.7.124

• epitaxy (HVPE) in two stages, as previously described [29]. Metallic gallium, ammonia (NH3) gas, hydrogen chloride (HCl) gas, and hydrogen (H2) were used as source materials and carrier gases. In the source zone, GaCl was formed as a result of chemical reactions between gaseous HCl and liquid Ga. GaCl and

Ammonia gas sensors based on In₂O₃/PANI hetero-nanofibers operating at room temperature

• Qingxin Nie,
• Zengyuan Pang,
• Hangyi Lu,
• Yibing Cai and
• Qufu Wei

Beilstein J. Nanotechnol. 2016, 7, 1312–1321, doi:10.3762/bjnano.7.122

• PANI influences the sensing performance of the In2O3/PANI composite nanofibers. In this paper, In2O3/PANI composite nanofibers with a mass ratio of 1:2 exhibited the highest response values, excellent selectivity, good repeatability and reversibility. Keywords: ammonia (NH3); electrospinning; gas

• pollution. Ammonia (NH3), as a highly toxic gas, can be emitted by natural and industrial sources and threaten human health [2][3][4]. NH3 at concentrations of 50 ppm may irritate the human respiratory system, skin and eyes [4]. Higher concentrations of NH3 will cause blindness, seizures, lung disease and

Gas sensing properties of nanocrystalline diamond at room temperature

• Marina Davydova,
• Pavel Kulha,
• Alexandr Laposa,
• Karel Hruska,
• Pavel Demo and
• Alexander Kromka

Beilstein J. Nanotechnol. 2014, 5, 2339–2345, doi:10.3762/bjnano.5.243

• ) for 15 min to stabilize the output characteristics. Subsequently, the specific testing gas (NH3) was injected into the chamber through the inlet port, and the change in the resistance of the sensors (dR/R) was investigated as a function of exposure time. Ammonia (NH3, quality N38, purity 99.98%) was

Sublattice asymmetry of impurity doping in graphene: A review

• James A. Lawlor and
• Mauro S. Ferreira

Beilstein J. Nanotechnol. 2014, 5, 1210–1217, doi:10.3762/bjnano.5.133

• ]. They discovered that graphene grown via chemical vapour deposition (CVD) in the presence of ammonia (NH3) naturally incorporates nitrogen atoms as substitutional so-called ’graphitic’ dopants (see Figure 1A) into the crystal, and with a distinct sublattice segregation of dopants. Indeed further

Zeolites as nanoporous, gas-sensitive materials for in situ monitoring of DeNO_x-SCR

• Thomas Simons and
• Ulrich Simon

Beilstein J. Nanotechnol. 2012, 3, 667–673, doi:10.3762/bjnano.3.76

• can be measured by different measuring techniques, such as infrared (IR) spectroscopy [2], NMR spectroscopy [3], thermal analysis [4][5][6] and indicator method [7], as well as the amine titration method [8] and temperature-programmed desorption of ammonia (NH3-TPD) [9][10][11]. H-form zeolites are